Brigitta blazer
Brigitta is a semi-fitted lined blazer with an accentuated waist. The back of the blazer is fitted with waist darts and a center seam. The front is fitted with waist darts that end at the bottom edge. The long set-in sleeves are made up of two pieces. The detachable stand collar is attached with a snap and closes with a button and buttonhole. The blazer has an off-center button and buttonhole closure and patch pockets with flaps at the front. The detachable belt with a buckle is attached to the blazer with belt loops at the side seams. Brigitta is hip-length.
Model Daria: Height 176 cm (5'9"), Bust 84 cm (33 1/8"), Waist 63 cm (24 3/4"), Hips 91 cm (35 7/8"). Daria is wearing size 36 in height 3.
Approximate sewing time — 3 days (25 hours).
To sew this blazer, choose medium-weight, structured, non-stretch or low-stretch suiting fabrics made of natural fibers, artificial fibers, blends, or synthetics.
The following fabrics are recommended: wool suiting, viscose suiting, gabardine.
Attention! We do not recommend stretchy, soft, lightweight (dress-weight wool), and loosely woven suiting fabrics.
For the lining, we recommend lining fabrics made of artificial fibers, synthetic fibers, or blends.
The blazer in the photo is made of viscose suiting. The fabric is medium weight, structured, and low-stretch. The fiber content is polyester (75%), viscose (18%), and elastane (7%). The fabric weight is 310 g/m2.
The lining is a blend of polyester (55%) and viscose (45%). The fabric weight is 130 g/m2.
1. Main fabric, 140 cm wide, with a directional print/nap, cut in two steps, in meters:
Height, cm | Sizes 34–38 | ||
Step 1 | Step 2 | Total | |
1 (154–160) | 1.55 | 0.7 | 2.25 |
2 (162–168) | 1.65 | 0.7 | 2.35 |
3 (170–176) | 1.7 | 0.75 | 2.45 |
4 (178–184) | 1.75 | 0.75 | 2.5 |
Height, cm | Sizes 40–44 | ||
Step 1 | Step 2 | Total | |
1 (154–160) | 1.6 | 0.7 | 2.3 |
2 (162–168) | 1.65 | 0.75 | 2.4 |
3 (170–176) | 1.7 | 0.75 | 2.45 |
4 (178–184) | 1.75 | 0.75 | 2.5 |
Height, cm | Sizes 46–52 | ||
Step 1 | Step 2 | Total | |
1 (154–160) | 1.7 | 0.7 | 2.4 |
2 (162–168) | 1.7 | 0.75 | 2.45 |
3 (170–176) | 1.75 | 0.75 | 2.5 |
4 (178–184) | 1.8 | 0.75 | 2.55 |
Main fabric, 55" wide, with a directional print/nap, cut in two steps, in yards:
Height, ft | Sizes 34–38 | ||
Step 1 | Step 2 | Total | |
1 (5’1”–5’3”) | 1 3/4 | 3/4 | 2 1/2 |
2 (5’4”–5’6”) | 1 3/4 | 3/4 | 2 5/8 |
3 (5’7”–5’9”) | 1 7/8 | 7/8 | 2 5/8 |
4 (5’10”–6’1”) | 1 7/8 | 7/8 | 2 3/4 |
Height, ft | Sizes 40–44 | ||
Step 1 | Step 2 | Total | |
1 (5’1”–5’3”) | 1 3/4 | 3/4 | 2 1/2 |
2 (5’4”–5’6”) | 1 3/4 | 7/8 | 2 5/8 |
3 (5’7”–5’9”) | 1 7/8 | 7/8 | 2 5/8 |
4 (5’10”–6’1”) | 1 7/8 | 7/8 | 2 3/4 |
Height, ft | Sizes 46–52 | ||
Step 1 | Step 2 | Total | |
1 (5’1”–5’3”) | 1 7/8 | 3/4 | 2 5/8 |
2 (5’4”–5’6”) | 1 7/8 | 7/8 | 2 5/8 |
3 (5’7”–5’9”) | 1 7/8 | 7/8 | 2 3/4 |
4 (5’10”–6’1”) | 2 | 7/8 | 2 3/4 |
2. Lining fabric, 140 cm wide, with a directional print, in meters:
Height, cm | Size | |||
34–38 | 40–44 | 46–48 | 50–52 | |
1 (154–160) | 1.45 | 1.5 | 1.55 | 1.6 |
2 (162–168) | 1.55 | 1.6 | 1.6 | 1.65 |
3 (170–176) | 1.6 | 1.65 | 1.65 | 1.7 |
4 (178–184) | 1.65 | 1.7 | 1.75 | 1.75 |
Lining fabric, 55" wide, with a directional print, in yards:
Height, ft | Size | |||
34–38 | 40–44 | 46–48 | 50–52 | |
1 (5’1”–5’3”) | 1 5/8 | 1 5/8 | 1 3/4 | 1 3/4 |
2 (5’4”–5’6”) | 1 3/4 | 1 3/4 | 1 3/4 | 1 3/4 |
3 (5’7”–5’9”) | 1 3/4 | 1 3/4 | 1 3/4 | 1 7/8 |
4 (5’10”–6’1”) | 1 3/4 | 1 7/8 | 1 7/8 | 1 7/8 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Woven interfacing, 140 cm wide, cut in one direction and in two steps, in meters:
Height, cm | Sizes 34–38 | ||
Step 1 | Step 2 | Total | |
1 (154–160) | 1.55 | 0.25 | 1.8 |
2 (162–168) | 1.65 | 0.25 | 1.9 |
3 (170–176) | 1.7 | 0.25 | 1.95 |
4 (178–184) | 1.75 | 0.25 | 2 |
Height, cm | Sizes 40–44 | ||
Step 1 | Step 2 | Total | |
1 (154–160) | 1.6 | 0.25 | 1.85 |
2 (162–168) | 1.65 | 0.25 | 1.9 |
3 (170–176) | 1.7 | 0.25 | 1.95 |
4 (178–184) | 1.75 | 0.25 | 2 |
Height, cm | Sizes 46–52 | ||
Step 1 | Step 2 | Total | |
1 (154–160) | 1.7 | 0.25 | 1.95 |
2 (162–168) | 1.7 | 0.25 | 1.95 |
3 (170–176) | 1.75 | 0.3 | 2.05 |
4 (178–184) | 1.8 | 0.3 | 2.1 |
Woven interfacing, 55" wide, cut in one direction and in two steps, in yards:
Height, ft | Sizes 34–44 | ||
Step 1 | Step 2 | Total | |
1 (5’1”–5’3”) | 1 3/4 | 1/4 | 2 |
2 (5’4”–5’6”) | 1 3/4 | 1/4 | 2 1/8 |
3 (5’7”–5’9”) | 1 7/8 | 1/4 | 2 1/8 |
4 (5’10”–6’1”) | 1 7/8 | 1/4 | 2 1/8 |
Height, ft | Sizes 46–52 | ||
Step 1 | Step 2 | Total | |
1 (5’1”–5’3”) | 1 7/8 | 1/4 | 2 1/8 |
2 (5’4”–5’6”) | 1 7/8 | 1/4 | 2 1/8 |
3 (5’7”–5’9”) | 1 7/8 | 3/8 | 2 1/4 |
4 (5’10”–6’1”) | 2 | 3/8 | 2 1/4 |
4. Stitched bias-cut fusible stay tape with stitch reinforcement, 1 cm (3/8") wide — 1.5 m (1 5/8 yd)
5. Stitched straight-grain fusible stay tape, 1 cm (3/8") wide — 3.7 m (4 yd)
6. One pair of shoulder pads
7. One pair of sleeve heads
8. Six buttons, 2–2.2 cm (3/4–7/8") in diameter
9. Two transparent snaps, 1 cm (3/8") in diameter
10. Eight grommets, 0.5 cm (1/4”) in diameter
11. One buckle with a prong, 5 cm (2") in diameter
12. Matching thread — 2 spools
- sewing machine for construction
- buttonhole foot for the sewing machine
- grommet press tool with a set of molds, hole puncher
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 9.7–13.5 | 3 7/8–5 3/8 |
Waistline ease | 14–18 | 5 1/2–7 1/8 |
Hipline ease | 10.5–13.8 | 4 1/8–5 3/8 |
Upper arm ease | 6.2–6.7 | 2 1/2–2 5/8 |
Height, cm | Back length, cm | Sleeve length, cm |
1 (154–160) | 69.2–71 | 61.5–63.3 |
2 (162–168) | 72.2–73.9 | 63.5–65.2 |
3 (170–176) | 75.2–76.9 | 65.4–67.1 |
4 (178–184) | 78.1–79.9 | 67.4–69 |
Height, ft | Back length, in | Sleeve length, in |
1 (5’1”–5’3”) | 27 1/4–28 | 24 1/4–24 7/8 |
2 (5’4”–5’6”) | 28 3/8–29 1/8 | 25–25 5/8 |
3 (5’7”–5’9”) | 29 5/8–30 1/4 | 24 3/4–26 3/8 |
4 (5’10”–6’1”) | 30 3/4–31 1/2 | 26 1/2–27 1/8 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for heights 3 and 4 the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Brigitta instructions Sample
Страница VK
VikiSews
Канал на YouTube
VikiSews
Telegram-канал
Vikisews Patterns