Easy to follow and fits great
2
Bryce blazer
Bryce blazer
999,97
Bryce is a cropped semi-fitted blazer with an accentuated waist. The front bust darts are converted into waist darts. There are waist and shoulder darts at the back. The turn-down collar is an imitation of the classic blazer-style notched collar. There are lower front patch pockets with flaps. The flaps close with buttons and buttonholes. The blazer has long, set-in, two-piece sleeves and a front button and buttonhole closure. The blazer is lined and finishes 2cm (3/4”) below the waistline.
Model Sofia: Height 172 cm (5’8”), Bust 84 cm (33 1/8”), Waist 64 cm (25 1/4”), Hips 90 cm (35 3/8”). Sofia is wearing size 36 in height 3.
Model Ksenia: Bust 86cm (33 3/4”), Waist 63cm (24 3/4”), Hips 92cm (36 1/4”), Height 171cm (5'7"). Ksenia is wearing size 36 in height 2.
Approximate sewing time – 14 hours.
To sew this garment, choose suiting and dress-weight fabrics with the following properties:
- medium-weight, non-stretch or low-stretch, opaque
- the fiber content can include natural fibers (wool, silk, cotton, linen), artificial fibers (viscose), blends (wool + silk, wool + polyester, cotton + viscose, etc.), and synthetics (polyester, polyester + elastane)
- the following fabrics are recommended: wool suiting, gabardine, tweed, corduroy, faux leather, suede.
Attention! We do not recommend very stretchy materials (knits) or lightweight, drapey, sheer fabrics (chiffon, challis, organza, stretch lace).
For the lining, choose lining fabrics made of artificial fibers (viscose), blends (viscose + elastane, viscose + polyester), and synthetics (polyester, polyester + elastane).
The garment in the photos is made of suiting. The fabric is medium-weight, pliable, soft, low-stretch. The fiber content is a blend of polyester, viscose and elastane.
The lining is a blend of viscose and polyester.
1. Main fabric, 140cm wide, cut in one direction, in meters:
Height, cm / size | 34–38 | 40–44 | 46–52 |
1 (154–160) | 1.3 | 1.35 | 1.4 |
2 (162–168) | 1.35 | 1.4 | 1.45 |
3 (170–176) | 1.35 | 1.4 | 1.5 |
4 (178–184) | 1.4 | 1.45 | 1.55 |
Main fabric, 55” wide, cut in one direction, in yards:
Height, ft / size | 34–38 | 40–44 | 46–52 |
1 (5’1”–5’3”) | 1 3/8 | 1 1/2 | 1 1/2 |
2 (5’4”–5’6”) | 1 1/2 | 1 1/2 | 1 5/8 |
3 (5’7”–5’9”) | 1 1/2 | 1 1/2 | 1 5/8 |
4 (5’10”–6’1”) | 1 1/2 | 1 5/8 | 1 3/4 |
Main fabric, 150cm wide, cut in one direction, in meters:
Height, cm / size | 34–38 | 40–42 | 44–52 |
1 (154–160) | 1.15 | 1.25 | 1.4 |
2 (162–168) | 1.15 | 1.3 | 1.4 |
3 (170–176) | 1.2 | 1.3 | 1.45 |
4 (178–184) | 1.25 | 1.35 | 1.45 |
Main fabric, 59” wide, cut in one direction, in yards:
Height, ft / size | 34–38 | 40–42 | 44–52 |
1 (5’1”–5’3”) | 1 1/4 | 1 3/8 | 1 1/2 |
2 (5’4”–5’6”) | 1 1/4 | 1 3/8 | 1 1/2 |
3 (5’7”–5’9”) | 1 1/4 | 1 3/8 | 1 5/8 |
4 (5’10”–6’1”) | 1 3/8 | 1 1/2 | 1 5/8 |
2. Lining fabric, 140cm wide, in meters:
Height, cm / size | 34–40 | 42–46 | 48–52 |
1 (154–160) | 0.85 | 0.95 | 1 |
2 (162–168) | 0.9 | 1 | 1.05 |
3 (170–176) | 0.9 | 1 | 1.05 |
4 (178–184) | 0.95 | 1.05 | 1.1 |
Lining fabric, 55” wide, in yards:
Height, ft / size | 34–40 | 42–46 | 48–52 |
1 (5’1”–5’3”) | 7/8 | 1 | 1 1/8 |
2 (5’4”–5’6”) | 1 | 1 1/8 | 1 1/8 |
3 (5’7”–5’9”) | 1 | 1 1/8 | 1 1/8 |
4 (5’10”–6’1”) | 1 | 1 1/8 | 1 1/4 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required. Before cutting the fabric, pre-shrink it (steam-iron it) and interface a length of fabric large enough to accommodate the main pattern pieces.
If you are planning to match stripes, add 5% to the fabric requirements.
3. Lightweight interfacing, knit or woven, 140cm wide, in meters:
Height, cm / size | 34–38 | 40–42 | 44–46 | 48–50 | 52 |
1 (154–160) | 0.9 | 0.95 | 1 | 1.05 | 1.05 |
2 (162–168) | 0.9 | 0.95 | 1 | 1.05 | 1.1 |
3 (170–176) | 0.95 | 0.95 | 1 | 1.05 | 1.1 |
4 (178–184) | 0.95 | 1 | 1.05 | 1.1 | 1.15 |
Lightweight interfacing, knit or woven, 55” wide, in yards:
Height, ft / size | 34–38 | 40–42 | 44–46 | 48–50 | 52 |
1 (5’1”–5’3”) | 1 | 1 | 1 1/8 | 1 1/8 | 1 1/8 |
2 (5’4”–5’6”) | 1 | 1 | 1 1/8 | 1 1/8 | 1 1/4 |
3 (5’7”–5’9”) | 1 | 1 | 1 1/8 | 1 1/8 | 1 1/4 |
4 (5’10”–6’1”) | 1 | 1 1/8 | 1 1/8 | 1 1/4 | 1 1/4 |
4. Stitch-reinforced fusible bias tape – 4m (4 3/8yd).
5. One pair of shoulder pads.
6. One pair of sleeve heads.
7. Four buttons, 2.2cm (7/8”) in diameter.
8. Matching thread – 1 spool for the sewing machine.
- sewing machine for construction;
- buttonhole foot for the sewing machine;
- edgestitch foot for the sewing machine (optional).
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 13.5–13.8 | 5 3/8 |
Waistline ease | 17.5–17.6 | 6 7/8 |
Upper arm ease | 7 | 2 3/4 |
Height, cm | Back length, cm | Sleeve length, cm |
1 (154–160) | 39.1–40.9 | 58.8–60.7 |
2 (162–168) | 40.1–41.9 | 60.8–62.6 |
3 (170–176) | 41.1–42.9 | 62.8–64.6 |
4 (178–184) | 42.1–43.9 | 64.8–66.6 |
Height, ft | Back length, in | Sleeve length, in |
1 (5’1”–5’3”) | 15 3/8–16 1/8 | 23 1/8–23 7/8 |
2 (5’4”–5’6”) | 15 3/4–16 1/2 | 23 7/8–24 5/8 |
3 (5’7”–5’9”) | 16 1/8–16 7/8 | 24 3/4–25 3/8 |
4 (5’10”–6’1”) | 16 5/8–17 1/4 | 25 1/2–26 1/4 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. the pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for height categories 3 and 4, the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Bryce instructions SampleВаш рост:
154-160162-168170-176178-184
Ваш размер (европейский):
34363840424446485052
999,97
