Tyene jacket
Tyene is a semi-fitted jacket with a straight silhouette. The back of the jacket is fitted with a center seam. The jacket has a classic notched collar with lapels and fastens with buttons and buttonholes at the center front. The free edges of the front facing and back neck facing are secured with decorative topstitching. Tyene is below-waist length.
Model Tatiana: Height 172 cm (5’8”), Bust 85 cm (33 1/2”), Waist 62 cm (24 3/8”), Hips 88 cm (34 5/8”). Tatiana is wearing size 36 in height 3.
Approximate sewing time — 1 day (8 hours).
To sew this jacket, choose soft, stretchy or low-stretch (1.2–1.8 stretch factor), medium-weight knit fabrics made of natural, artificial, blended, or synthetic fibers.
The following fabrics are recommended: three-thread fleece knits, double knits, or sweater knits.
Attention! We recommend using only stretchy knit fabrics for this jacket.
You can determine the stretch factor yourself. Mark a 10 cm (4") section across the width of the fabric, place it next to a ruler, and stretch it. Divide the resulting measurement by 10.
The jacket in the photo is made of double-layer knit. The fabric is medium-weight, soft, and low-stretch. The fiber content is 68% polyester + 29% viscose + 3% elastane. Fabric weight is 400 g/m². The stretch factor is 1.4.
1. Main fabric, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | |||||
34–36 | 38 | 40 | 42–48 | 50 | 52 | |
1 (154–160) | 0.85 | 0.85 | 1.1 | 1.1 | 1.15 | 1.15 |
2 (162–168) | 0.9 | 0.9 | 1.15 | 1.15 | 1.15 | 1.2 |
3 (170–176) | 0.95 | 0.95 | 1.15 | 1.2 | 1.2 | 1.25 |
4 (178–184) | 0.95 | 1 | 1.2 | 1.25 | 1.25 | 1.3 |
Main fabric, 55’’ wide, with a directional print/nap, in yards:
Height, ft | Size | |||||
34–36 | 38 | 40 | 42–48 | 50 | 52 | |
1 (5'1"–5'3") | ⅞ | ⅞ | 1 ¼ | 1 ¼ | 1 ¼ | 1 ¼ |
2 (5'4"–5'6") | 1 | 1 | 1 ¼ | 1 ¼ | 1 ¼ | 1 ¼ |
3 (5'7"–5'9") | 1 | 1 | 1 ¼ | 1 ¼ | 1 ¼ | 1 ⅜ |
4 (5'10"–6'1") | 1 | 1 ⅛ | 1 ¼ | 1 ⅜ | 1 ⅜ | 1 ⅜ |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
2. Lightweight knit interfacing, 140 cm wide, in meters:
Height, cm | Size | |||
34 | 36–44 | 46 | 48–52 | |
1 (154–160) | 0.55 | 0.6 | 0.6 | 0.6 |
2 (162–168) | 0.6 | 0.6 | 0.65 | 0.65 |
3 (170–176) | 0.6 | 0.65 | 0.65 | 0.65 |
4 (178–184) | 0.65 | 0.65 | 0.65 | 0.7 |
Lightweight knit interfacing, 55’’ wide, in yards:
Height, ft | Size | |||
34 | 36–44 | 46 | 48–52 | |
1 (5'1"–5'3") | ⅝ | ⅝ | ⅝ | ⅝ |
2 (5'4"–5'6") | ⅝ | ⅝ | ¾ | ¾ |
3 (5'7"–5'9") | ¾ | ¾ | ¾ | ¾ |
4 (5'10"–6'1") | ¾ | ¾ | ¾ | ¾ |
3. Stitched bias-cut fusible stay tape with stitch reinforcement, 1.5 cm (5/8") wide — 2–2.45 m (2 1/8–2 5/8 yd).
4. Three buttons, 15–17 mm (5/8") in diameter.
5. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker).
- sewing machine for construction
- buttonhole foot for the sewing machine
- overlocker for stitching and finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- coverstitch or coverlock machine for finishing the garment hem. If you don’t have a coverstitch machine, it can be replaced with a twin needle on any regular sewing machine that can do a zigzag stitch
IMPORTANT! We recommend using specialty needles when working with knit fabrics (for example, STRETCH, SUPER STRETCH, JERSEY, etc.). These are ballpoint needles, so they part the threads of the fabric you are stitching without piercing them.
Bust ease | Waistline ease | Upper arm ease | |
cm | 14.6–1.6 | 33.2–18.4 | 5–1.3 |
inches | 5 ¾– ⅝ | 13 ⅛–7 ¼ | 2–½ |
Height, cm | Back length, cm | Sleeve length, cm |
1 (154 – 160) | 48.1–47.8 | 24.2 – 26.2 |
2 (162 – 168) | 50.1–49.8 | 25.4 – 27.4 |
3 (170 – 176) | 52.1–51.8 | 26.6 – 30.2 |
4 (178 – 184) | 54.1–53.8 | 27.8 – 33.1 |
Height, ft | Back length, in | Sleeve length, in |
1 (5'1"–5'3") | 18 ⅞ | 9 ½–10 ⅜ |
2 (5'4"–5'7") | 19 ¾–19 ⅝ | 10–10 ¾ |
3 (5'7"–5'10") | 20 ½–20 ⅜ | 10 ½–11 ⅞ |
4 (5'10"–6'1") | 21 ¼–21 ⅛ | 11–13 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900 mm width.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Tyene Instructions Sample
Страница VK
VikiSews
Канал на YouTube
VikiSews
Telegram-канал
Vikisews Patterns