Irene jumpsuit (boy)
Irene is a semi-fitted jumpsuit with a cinched waist. The front features patch pockets located at the bustline and hipline, as well as welt zipper pockets. The front and back feature yoke details, the back also has a box pleat below the yoke, and a waist seam. This jumpsuit has a wide casing with elastic at the waistline across the back and the front. Irene has a stand collar, and fastens with a center front zipper concealed with a placket. The placket closes with two set-in snap fasteners. Irene has a long set-in sleeve and the bottom of the sleeve and pants has three elastic casings. All the pockets, the placket, and the stand collar have decorative topstitching. Irene is ankle length.
Model Zakhar: Height 133cm (52.36”), Chest 62cm (24 3/8”), Waist 54cm (21 ¼”), Hips 69 (27 1/8”). Zakhar is wearing size 32 in height 134cm (52.75”).
To sew this jumpsuit, choose woven fabrics with the following properties:
- Medium weight, soft, stretchy;
- The fiber content can include natural fibers (wool, cotton), blends (wool + polyester, cotton + polyester + elastane, etc.), and synthetic (polyester, polyester + elastane);
- The following fabrics are recommended: corduroy, denim.
Attention! The fabric must contain elastane.
The jumpsuit in the photo is made of denim. This fabric is medium weight, soft and stretchy. The fiber content is a blend of cotton and elastane.
1. Main fabric, 140cm wide, for a directional print/nap, in meters:
Height, cm | Size 26 | Size 28 | Size 30 | Size 32 | Size 34 | Size 36 | Size 38 | Size 40 |
98 | 1.3 | 1.3 | ||||||
104 | 1.4 | 1.4 | ||||||
110 | 1.45 | 1.45 | ||||||
116 | 1.5 | 1.5 | ||||||
122 | 1.6 | 1.6 | ||||||
128 | 1.8 | 1.8 | 1.8 | |||||
134 | 1.9 | 1.9 | 1.9 | |||||
140 | 1.95 | 1.95 | 1.95 | |||||
146 | 2.05 | 2.05 | 2.1 | |||||
152 | 2.15 | 2.15 | 2.25 | |||||
158 | 2.2 | 2.3 |
Main fabric, 55” wide, for a directional print/nap, in yards:
Height, in | Size 26 | Size 28 | Size 30 | Size 32 | Size 34 | Size 36 | Size 38 | Size 40 |
38.5 | 1 3/8 | 1 38 | ||||||
41 | 1 1/2 | 1 1/2 | ||||||
43.25 | 1 5/8 | 1 5/8 | ||||||
45.5 | 1 5/8 | 1 5/8 | ||||||
48 | 1 3/4 | 1 3/4 | ||||||
50.5 | 2 | 2 | 2 | |||||
52.75 | 2 1/8 | 2 1/8 | 2 1/8 | |||||
55 | 2 1/8 | 2 1/8 | 2 1/8 | |||||
57.5 | 2 1/4 | 2 1/4 | 2 1/4 | |||||
60 | 2 3/8 | 2 3/8 | 2 1/2 | |||||
62.25 | 2 3/8 | 2 1/2 |
2. Lining fabric, 140cm wide, in meters:
Height, cm | Height, cm | Height, cm | |
98−104 | 110−140 | 146−158 | |
Meters | 0.2 | 0.25 | 0.3 |
Lining fabric, 55” wide, in yards:
Height, in | Height, in | Height, in | |
38.5”−41” | 43.25”−55” | 57.5”−62.25” | |
Yards | 1/4 | 1/4 | 3/8 |
Important!
When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Woven fusible interfacing, 140cm wide, in meters:
Height, cm | Height, cm | Height, cm | Height, cm | |
98−110 | 116−128 | 134−146 | 152−158 | |
Meters | 0.4 | 0.45 | 0.5 | 0.55 |
Woven fusible interfacing, 55” wide, in yards:
Height, in | Height, in | Height, in | Height, in | |
38.5” −43.25” | 45.5” −50.5” | 52.75” −57.5” | 60” −62.25” | |
Yards | 3/8 | 1/2 | 1/2 | 5/8 |
4. One zipper with metal teeth for the center front, two zippers with metal teeth for the pockets:
Height, cm | 98−110 | 116−128 | 134−146 | 152−158 |
Front zipper length, cm | 35 | 40 | 45 | 50 |
Pocket zipper length, cm | 12 | 13 | 14 | 15 |
Height, in | 38.5” −43.25” | 45.5” −50.5” | 52.75” −57.5” | 60” −62.25” |
Front zipper length, in | 13 3/4 | 15 3/4 | 17 3/4 | 19 5/8 |
Pocket zipper length, in | 4 3/4 | 5 1/8 | 5 1/2 | 5 7/8 |
5. Two set-in snaps 7mm (1/4”) in diameter
6. Fusible tape interfacing, 1cm (3/8”) wide (cut along the selvedge and stitched) - up to 1m (39 3/8”) depending on size
7. 4cm (1 5/8”) wide elastic band:
Size | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 |
Meters | 0.4 | 0.42 | 0.45 | 0.47 | 0.5 | 0.52 | 0.55 | 0.57 |
Yards | 3/8 | 1/2 | 1/2 | 1/2 | 1/2 | 5/8 | 5/8 | 5/8 |
8. 1cm (3/8”) wide elastic band:
Size | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 |
Meters | 2.4 | 2.45 | 2.5 | 2.6 | 2.8 | 2.8 | 2.9 | 3 |
Yards | 2 5/8 | 2 5/8 | 2 3/4 | 2 7/8 | 3 | 3 | 3 1/8 | 3 1/4 |
9. Matching thread − 5 spools (1 spool for the sewing machine and 4 spools for the overlocker).
10. Matching topstitching thread − 1 spool.
- Sewing machine for construction;
- Overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2-3mm, stitch length 2.5mm);
- Stitch-in-the-ditch foot for your sewing machine (optional).
Ease type | Ease measurement, cm | Ease measurement, in |
Chest ease | 24.1−24.6 | 9 1/2−9 5/8 |
Waistline ease | 21.7−27.7 | 8 1/2−10 7/8 |
Hipline ease | 12.7−12.8 | 5 |
Upper arm ease | 11.5 | 4 1/2 |
Height, cm | Length at side seam from waist down, cm (diff. for each size) | Sleeve length including shoulder width, cm |
98 | 58.2 | 42.3−42.9 |
104 | 62.7 | 44.8−45.3 |
110 | 67.2 | 47.8−48.3 |
116 | 71.7 | 53.3−53.8 |
122 | 76.2 | 56.3−56.8 |
128 | 81.6 | 58.8−59.4 |
134 | 86 | 61.5−62.1 |
140 | 90.4 | 64.2−64.8 |
146 | 94.8 | 66.9−67.5 |
152 | 100.5 | 69.7−70.5 |
158 | 104.6 | 72.6−73 |
Height, in | Length at side seam from waist down, in (diff. for each size) | Sleeve length including shoulder width, in |
38.5 | 22 7/8 | 16 5/8 – 16 7/8 |
41 | 24 5/8 | 17 5/8 – 17 7/8 |
43.25 | 26 1/2 | 18 7/8 – 19 |
45.5 | 28 1/4 | 21 – 21 1/8 |
48 | 30 | 22 1/8 – 22 3/8 |
50.5 | 32 1/8 | 23 1/8 – 23 3/8 |
52.75 | 33 7/8 | 24 1/4 – 24 1/2 |
55 | 35 5/8 | 25 1/4 – 25 1/2 |
57.5 | 37 3/8 | 26 3/8 – 26 5/8 |
60 | 39 5/8 | 27 1/2 – 27 3/4 |
62.25 | 41 1/8 | 28 5/8 −28 3/4 |
Finished elastic length at bottom of sleeve
Size 26 | Size 28 | Size 30 | Size 32 | Size 34 | Size 36 | Size 38 | Size 40 | |
Cm | 14.7 | 15.2 | 15.7 | 16.2 | 17.2 | 17,7 | 18.2 | 18.7 |
In | 5 3/4 | 6 | 6 1/8 | 6 3/8 | 6 3/4 | 7 | 7 1/8 | 7 3/8 |
Finished elastic length at bottom of pant
Size 26 | Size 28 | Size 30 | Size 32 | Size 34 | Size 36 | Size 38 | Size 40 | |
Cm | 18.7 | 19.6 | 20.5 | 21.4 | 22.6 | 23.6 | 24.6 | 26.2 |
In | 7 3/8 | 7 3/4 | 8 1/8 | 8 3/8 | 8 7/8 | 9 1/4 | 9 5/8 | 10 3/8 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. the pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for height categories 3 and 4, the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Irene instructions Sample (boy)
VK Website
VikiSews
YouTube
VikiSews