Mickey jumper (boys)

0,00
0,00

Mickey is a semi-fitted childrens jumper with a straight silhouette. It features long set-in sleeves finished with cuffs and a crew neck finished with a neckband. The jumper is below-hip length.

Approximate sewing time: 1 day (3 hours).

Model Zachary: Height 138 (54 3/8"), Chest 63 (24 3/4"), Waist 59 (23 1/4"), Hips 75 (29 1/2"). Zachary is wearing size 32 in height 134 (52.75"). The pattern has been altered to correspond to the height of the model.

To sew this garment, choose knit fabrics with the following properties:

- soft, breathable, stretchy or with very little stretch, medium-weight;

- the fabric content can include natural (wool, cotton) or artificial (viscose) fibers, blends (cotton + polyester, cotton + elastane, etc.), and synthetic fibers (polyester, polyester + elastane);

- the following fabrics are recommended: jersey, light-weight French terry, Ponte de Roma, interlock knits.

Attention! We do not recommend lightweight sheer fabrics (chiffon, organza, non-stretch lace, any dry non-stretch fabrics).

The garment in the photo is made of jersey fabric. This fabric is medium-weight, soft, and has a good amount of stretch. The fiber content is a blend of cotton and spandex. The cuffs and neckband are made of ribbing.

1. Main fabric, 140cm wide, in meters:

Height, cm / Size

26

28

30

32

34

36

38

40

98

0.48

0.48

104

0.49

0.5

110

0.52

0.53

116

0.55

0.56

122

0.57

0.67

128

0.59

0.77

0.85

134

0.88

0.9

0.97

140

0.95

1.01

1.01

146

1.05

1.05

1.05

152

1.1

1.11

1.11

158

1.14

1.14

Main fabric, 55” wide, in yards:

Height, in / Size

26

28

30

32

34

36

38

40

38.5

1/2

1/2

41

1/2

1/2

43.25

5/8

5/8

45.5

5/8

5/8

48

5/8

3/4

50.5

5/8

7/8

7/8

52.75

1

1

1

55

1

1 1/8

1 1/8

57.5

1 1/8

1 1/8

1 1/8

60

1 1/4

1 1/4

1 1/4

62.25

1 1/4

1 1/4

Main fabric, 180cm wide, in meters:

Height, cm / Size

26

28

30

32

34

36

38

40

98

0.48

0.48

104

0.5

0.5

110

0.52

0.53

116

0.55

0.56

122

0.57

0.57

128

0.59

0.6

0.6

134

0.62

0.62

0.62

140

0.64

0.64

0.64

146

0.66

0.66

0.66

152

0.69

0.69

0.69

158

0.72

0.72

Main fabric, 70” wide, in yards:

Height, in / Size

26

28

30

32

34

36

38

40

38.5

1/2

1/2

41

1/2

1/2

43.25

5/8

5/8

45.5

5/8

5/8

48

5/8

5/8

50.5

5/8

5/8

5/8

52.75

5/8

5/8

5/8

55

3/4

3/4

3/4

57.5

3/4

3/4

3/4

60

3/4

3/4

3/4

62.25

3/4

3/4

2. Additional fabric (ribbing), 120cm (47”) wide - 0.1m (4”) for all sizes in all heights.

IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.

3. Two strips of knit fusible interfacing 1cm (3/8”) wide to interface the shoulder seam allowances of the front piece. The length of strips is 10–20cm (4–8”) depending on height and size (measure the length using the pattern piece). The grainline of the interfacing should be parallel to the longer edge of the strip (along the interfacing selvedge). You can use shop-bought fusible interfacing tape instead.

4. Matching thread – 5 spools (1 spool for the sewing machine and 4 spools for the overlocker).

- sewing machine for attaching cuffs and neckband;

- overlocker for construction and for finishing raw edges. It may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm);

- coverstitch or coverlock machine for hemming. If you don’t have a coverstitch machine, you can hem the garment using a twin needle on a sewing machine with a zigzag function.

IMPORTANT! When sewing knit fabrics, it’s recommended to use specialty needles for knits (such as ballpoint, STRETCH, SUPER STRETCH, JERSEY, etc.). These needles have a rounded tip which allows the needle to pass in between the loops instead of piercing the threads.

Ease type

Ease measurement, cm

Ease measurement, in

Chest ease

12.4–12.5

4 7/8

Waistline ease

13.4–20.4

5 1/4–8          

Hipline ease

7

2 3/4

Upper arm ease

8.1–3.9

3 1/4–1 1/2

Height, cm

Centre back length

including neckband, cm           

Sleeve length

including cuff, cm

98

41.3

36.9–37.1

104

43.3

39.1–39.2

110

45.3

41.3–41.5

116

48.3

43.6–43.7

122

50.3

45.7–45.9

128

52.3

47.8–47.9

134

54.3

49.8–49.9

140

56.3

51.8–51.9

146

59.3

53.8–53.9

152

62.3

56.2–56.5

158

65.3

58.4

Height, in

Centre back length including neckband, in

Sleeve length including cuff, in

38.5

16 1/4

14 1/2–14 5/8

41

17

15 3/8

43.25

17 7/8

16 1/4–16 3/8

45.5

19

17 1/8–17 1/4

48

19 3/4

18–18 1/8

50.5

20 5/8

18 7/8

52.75

21 3/8

19 5/8

55

22 1/8

20 3/8

57.5

23 3/8

21 1/8–21 1/4

60

24 1/2

22 1/8–22 1/4

62.25

25 3/4

23

Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download: 

1. the pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for height categories 3 and 4, the plotter pattern comes on 2 pages. 

2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).

If you have any questions, please let us know at info@vikisews.com

Mickey instructions Sample
Ваш рост:
98104110116122128134140146152158
Ваш размер (европейский):
2628
0,00
0,00
Этот товар уже куплен Вами. Вы можете выбрать другой рост или размер, или перейти в Личный кабинет для просмотра данного товара.
КупитьПерейти в корзину