Eden dress
Eden is a semi-fitted dress with an accentuated waist and a waist seam. It is fitted with waist darts at the back and princess seams that transition into darts at the front. The dress features long, set-in sleeves, a deep square neckline on the front and a round neckline on the back. It closes with an invisible zipper in the center back seam. Eden is above-knee length.
Model Varvara: Height 174 cm (5’8”), Bust 86 cm (33 7/8”), Waist 64 cm (25 1/4”), Hips 92 cm (36 1/4”). Varvara is wearing size 36 in height 3.
Approximate sewing time — 1.5 days (12 hours).
To sew this dress, choose dress-weight fabrics with the following properties:
- medium weight, soft, non-stretch or low-stretch
- the fiber content can include natural fibers (wool, cotton), artificial fibers (viscose), blends (wool + polyester, cotton + viscose, etc.), and synthetics (polyester)
- the following fabrics are recommended: dress-weight wool, suiting fabrics, gabardine, jersey fabrics.
Attention! We do not recommend lightweight and very stretchy fabrics.
The dress in the photo is made of suiting fabric. The fabric is medium-weight, soft, and low-stretch. The fiber content is a blend of 56% polyester and 44% viscose. The fabric weight is 400 g/m2.
1. Main fabric, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | |||||||
34 | 36 | 38 | 40–44 | 46 | 48 | 50 | 52 | |
1.2 | 1.3 | 1.35 | 1.4 | 1.4 | 1.45 | 1.6 | 1.6 | |
2 (162–168) | 1.25 | 1.35 | 1.4 | 1.45 | 1.45 | 1.55 | 1.65 | 1.65 |
3 (170–176) | 1.3 | 1.4 | 1.5 | 1.5 | 1.55 | 1.6 | 1.7 | 1.75 |
4 (178–184) | 1.4 | 1.5 | 1.55 | 1.55 | 1.6 | 1.7 | 1.75 | 1.8 |
Main fabric, 55" wide, with a directional print/nap, in yards:
Height, ft | Size | |||||||
34 | 36 | 38 | 40–44 | 46 | 48 | 50 | 52 | |
1 (5’1”–5’3”) | 1 1/4 | 1 3/8 | 1 1/2 | 1 1/2 | 1 1/2 | 1 5/8 | 1 3/4 | 1 3/4 |
2 (5’4”–5’6”) | 1 3/8 | 1 1/2 | 1 1/2 | 1 5/8 | 1 5/8 | 1 3/4 | 1 3/4 | 1 3/4 |
3 (5’7”–5’9”) | 1 3/8 | 1 1/2 | 1 5/8 | 1 5/8 | 1 3/4 | 1 3/4 | 1 7/8 | 1 7/8 |
4 (5’10”–6’1”) | 1 1/2 | 1 5/8 | 1 3/4 | 1 3/4 | 1 3/4 | 1 7/8 | 1 7/8 | 2 |
Main fabric, 150 cm wide, with a directional print/nap, in meters:
Height, cm | Size | |||||||
34 | 36–38 | 40 | 42 | 44 | 46 | 48–50 | 52 | |
1 (154–160) | 1.15 | 1.2 | 1.25 | 1.3 | 1.35 | 1.35 | 1.4 | 1.45 |
2 (162–168) | 1.2 | 1.25 | 1.3 | 1.35 | 1.4 | 1.45 | 1.45 | 1.5 |
3 (170–176) | 1.25 | 1.3 | 1.35 | 1.4 | 1.45 | 1.5 | 1.5 | 1.6 |
4 (178–184) | 1.3 | 1.35 | 1.4 | 1.45 | 1.55 | 1.55 | 1.55 | 1.65 |
Main fabric, 59" wide, with a directional print/nap, in yards:
Height, ft | Size | |||||||
34 | 36–38 | 40 | 42 | 44 | 46 | 48–50 | 52 | |
1 (5’1”–5’3”) | 1 1/4 | 1 1/4 | 1 3/8 | 1 3/8 | 1 1/2 | 1 1/2 | 1 1/2 | 1 5/8 |
2 (5’4”–5’6”) | 1 1/4 | 1 3/8 | 1 3/8 | 1 1/2 | 1 1/2 | 1 5/8 | 1 5/8 | 1 5/8 |
3 (5’7”–5’9”) | 1 3/8 | 1 3/8 | 1 1/2 | 1 1/2 | 1 5/8 | 1 5/8 | 1 5/8 | 1 3/4 |
4 (5’10”–6’1”) | 1 3/8 | 1 1/2 | 1 1/2 | 1 5/8 | 1 3/4 | 1 3/4 | 1 3/4 | 1 3/4 |
2. Lining fabric to cover shoulder pads, 140 cm (55") wide, for all sizes in all heights — 0.3 m (3/8 yd)
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Lightweight knit or woven interfacing, 140 cm (55") wide, for all sizes in all heights — 0.25 m (1/4 yd)
4. One invisible zipper for all sizes:
Height, cm | cm |
1 (154–160) | 55 |
2 (162–168) | 55 |
3 (170–176) | 65 |
4 (178–184) | 65 |
Height, ft | inches |
1 (5’1”–5’3”) | 21 5/8 |
2 (5’4”–5’6”) | 21 5/8 |
3 (5’7”–5’9”) | 25 5/8 |
4 (5’10”–6’1”) | 25 5/8 |
5. Stitched bias-cut fusible stay tape, for all sizes in all heights — 20 cm (7 7/8")
6. Stitched straight-grain fusible stay tape, for all sizes in all heights — 35 cm (13 3/4")
7. One pair of shoulder pads, 7 mm (about 1/4") in height
8. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
- sewing machine for construction
- overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- stitch-in-the-ditch foot for the sewing machine (optional)
- invisible zipper foot for the sewing machine
- one-sided foot for the sewing machine
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 2.7−4.6 | 1 1/8−1 3/4 |
Waistline ease | 1 | 3/8 |
Hipline ease | 2.5 | 1 |
Upper arm ease | 3.9−4.7 | 1 1/2−1 7/8 |
Height, cm | Center back length, cm | Sleeve length (estimated), cm |
1 (154–160) | 78.6−81.9 | 62.9−63 |
2 (162–168) | 82.6−85.9 | 64.9−65 |
3 (170–176) | 86.6−89.9 | 66.9−67 |
4 (178–184) | 90.4−93.9 | 68.9−69 |
Height, ft | Center back length, in | Sleeve length (estimated), in |
1 (5’1”–5’3”) | 31−32 1/4 | 24 3/4 |
2 (5’4”–5’6”) | 32 1/2−33 7/8 | 25 1/2−25 5/8 |
3 (5’7”–5’9”) | 34 1/8−35 3/8 | 26 3/8 |
4 (5’10”–6’1”) | 35 5/8−37 | 27 1/8 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900 mm width.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Eden Instructions Sample
VK Website
VikiSews
YouTube
VikiSews