Kurt pants
Kurt is a pair of loose-fitting pants with a straight silhouette. The applied waistband has topstitched belt loops. The front features slash pockets and a watch pocket on the right. The back has an applied yoke and patch pockets. All seams are topstitched. The waistband closes with a button and buttonhole. The pants have a fly front zipper closure and are floor-length.
Model Danil: Height 184 cm (6’), Chest 100 cm (39 3/8”), Waist 84 cm (33 1/8”), Hips 105 cm (41 3/8”). Danil is wearing size 44 in height 2.
Approximate sewing time — 1 day (8 hours).
To sew these pants, choose heavy-weight or medium-weight, non-stretch or low-stretch fabrics. The fiber content can include natural fibers (cotton), artificial fibers (viscose), or blended fibers (cotton + viscose, cotton + polyester, etc.).
The following fabrics are recommended: denim, corduroy.
For the pocket lining, use cotton, poplin.
The pants in the photo are made of denim. The fabric is medium weight and non-stretch. The fiber content is 100% cotton. The fabric weight is 450 g/m².
The pocket lining is made of 100% cotton.
Main fabric, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | |||
38 | 40 | 42–52 | 54 | |
1 (170–176) | 1.45 | 1.5 | 1.95 | 1.95 |
2 (178–184) | 1.5 | 1.55 | 2 | 2.05 |
3 (186–192) | 1.55 | 1.6 | 2.1 | 2.1 |
4 (194–200) | 1.6 | 1.75 | 2.15 | 2.2 |
Main fabric, 55" wide, with a directional print/nap, in yards:
Height, ft | Size | |||
38 | 40 | 42–52 | 54 | |
1 (5'7"–5'9") | 1 5/8 | 1 5/8 | 2 1/8 | 2 1/8 |
2 (5'10"–6') | 1 5/8 | 1 3/4 | 2 1/8 | 2 1/4 |
3 (6'1"–6'3") | 1 3/4 | 1 3/4 | 2 1/4 | 2 1/4 |
4 (6'4"–6'7") | 1 3/4 | 1 7/8 | 2 3/8 | 2 3/8 |
Main fabric, 150 cm wide, with a directional print/nap, in meters:
Height, cm | Size | ||
38–42 | 44 | 46–54 | |
1 (170–176) | 1.4 | 1.45 | 1.95 |
2 (178–184) | 1.45 | 1.5 | 2 |
3 (186–192) | 1.5 | 1.5 | 2.05 |
4 (194–200) | 1.55 | 1.55 | 2.15 |
Main fabric, 59" wide, with a directional print/nap, in yards:
Height, ft | Size | ||
38–42 | 44 | 46–54 | |
1 (5'7"–5'9") | 1 1/2 | 1 5/8 | 2 1/8 |
2 (5'10"–6') | 1 5/8 | 1 5/8 | 2 1/8 |
3 (6'1"–6'3") | 1 5/8 | 1 5/8 | 2 1/4 |
4 (6'4"–6'7") | 1 3/4 | 1 3/4 | 2 3/8 |
2. Lining fabric, 140 cm (55") wide, for all sizes and heights — 0.25 m (1/4 yd)
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Lightweight interfacing, knit or woven, 140 cm (55") wide, 50 g/m², for all heights:
Size | ||||||||
38 | 40 | 42–44 | 46 | 48 | 50 | 52 | 54 | |
meters | 0.95 | 1 | 1.05 | 1.1 | 1.15 | 1.2 | 1.2 | 1.25 |
yards | 1 | 1 1/8 | 1 1/8 | 1 1/4 | 1 1/4 | 1 1/4 | 1 1/4 | 1 3/8 |
4. One metal pant zipper, 20 cm (8") long, for all sizes and heights
5. Bias-cut fusible stay tape, 1 cm (3/8") wide — 0.7 m (3/4 yd)
6. One metal stud button for jeans, 2–2.5 cm (3/4–1") in diameter
7. Six metal rivets, 7 mm (just over 1/4") in diameter
8. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
9. Matching (or contrasting) topstitching thread (e.g., Madeira No. 35) — 2 spools
- sewing machine for construction
- overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- buttonhole foot for the sewing machine
- stitch-in-the-ditch foot for the sewing machine (optional)
- one-sided foot for the sewing machine
- press tool with a set of molds for installing a stud buttonand rivets, hole puncher
Waistline ease (estimated) | Hipline ease | |
cm | 4.8–7.9 | 1.5–2.9 |
inches | 1 7/8–3 1/8 | 5/8–1 1/8 |
Height, cm | Side seam length including waistband, cm |
1 (170–176) | 108.1–108.3 |
2 (178–184) | 112–112.3 |
3 (186-192) | 116.1–116.3 |
4 (194-200) | 120.1–120.3 |
Height, ft | Side seam length including waistband, in |
1 (5'7"–5'9") | 42 1/2–42 5/8 |
2 (5'10"–6') | 44 1/8–44 1/4 |
3 (6'1"–6'3") | 45 3/4 |
4 (6'4"–6'7") | 47 1/4–47 3/8 |
Finished hem width, for all heights | |||||||||
Size | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 | 54 |
cm | 24.4 | 24.8 | 25.2 | 25.6 | 26 | 26.4 | 26.8 | 27.2 | 27.6 |
inches | 9 5/8 | 9 3/4 | 9 7/8 | 10 1/8 | 10 1/4 | 10 3/8 | 10 1/2 | 10 3/4 | 10 7/8 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900 mm width.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Kurt instructions Sample
VK Website
VikiSews
YouTube
VikiSews