Eiza Shearling Jacket
Eiza is a semi-fitted shearling jacket with a straight silhouette and extended shoulders. The front features yokes, princess seams, and welt pockets on both sides. The jacket closes with an off-center zipper in the left front princess seam. The back features a yoke and princess seams. The set-in sleeves are made up of two pieces and feature turn-back cuffs. The jacket has a turn-down collar and a waistband that closes with snaps. Eiza features decorative topstitching and is below-hip length.
Model Sofia: Height 172 cm (5’8”), Bust 84 cm (33 1/8”), Waist 64 cm (25 1/4”), Hips 90 cm (35 3/8”). Sofia is wearing size 36 in height 3.
Approximate sewing time — 3 days (24–30 hours).
To sew this shearling jacket, choose fur-backed faux leather with the following properties:
- malleable, soft, low-stretch or non-stretch
- the fiber content of the faux fur can include natural fibers (wool), blends (wool + polyester), and synthetics (polyester)
Important! The fur pile must not be higher than 1 cm (3/8").
Attention! Before sewing the garment, we suggest purchasing a small piece of fabric (10 cm [4"]) and testing whether your sewing machine is capable of sewing through two layers of the fabric.
For the binding pieces, we recommend using faux leather or faux suede that matches the outer layer of the garment. The fabric weight is 200 g/m2.
For the inner pocket lining, we recommend using pocketing fabric that includes natural (cotton) or synthetic (polyester) fibers. The fabric weight is 100 g/m2.
For the outer pocket lining, we recommend using faux leather or faux suede that matches either the outer or the inner layer of the garment. The fabric weight is 200 g/m2.
The shearling jacket in the photo is made of fur-backed faux leather. The pile height is 1 cm (3/8"). The fabric is malleable, soft, and non-stretch. The fiber content is polyurethane (50%) and polyester (50%). The fabric weight is 870 g/m2.
1. Main fabric, 140 cm wide, 870 g/m2, with a directional print/nap, in meters:
Height, cm | Size | |||
34–38 | 40–44 | 46–48 | 50–52 | |
1.75 | 1.9 | 2.05 | 2.1 | |
2 (162–168) | 1.8 | 2 | 2.1 | 2.15 |
3 (170-176) | 1.85 | 2.05 | 2.2 | 2.2 |
4 (178–184) | 1.9 | 2.1 | 2.25 | 2.3 |
Main fabric, 160 cm wide, 870 g/m2, with a directional print/nap, in meters:
Height, cm | Size | ||
34–38 | 40–44 | 46–52 | |
1 (154–160) | 1.55 | 1.7 | 1.85 |
2 (162–168) | 1.6 | 1.75 | 1.9 |
3 (170–176) | 1.7 | 1.8 | 1.95 |
4 (178–184) | 1.75 | 1.9 | 2 |
Main fabric, 55" wide, 870 g/m2, with a directional print/nap, in yards:
Height, ft | Size | |||
34–38 | 40–44 | 46–48 | 50–52 | |
1 (5’1”–5’3”) | 1 7/8 | 2 1/8 | 2 1/4 | 2 1/4 |
2 (5’4”–5’6”) | 2 | 2 1/8 | 2 1/4 | 2 3/8 |
3 (5’7”–5’9”) | 2 | 2 1/4 | 2 3/8 | 2 3/8 |
4 (5’10”–6’1”) | 2 1/8 | 2 1/4 | 2 1/2 | 2 1/2 |
Main fabric, 63" wide, 870 g/m2, with a directional print/nap, in yards:
Height, ft | Size | ||
34–38 | 40–44 | 46–52 | |
1 (5’1”–5’3”) | 1 3/4 | 1 7/8 | 2 |
2 (5’4”–5’6”) | 1 3/4 | 1 7/8 | 2 1/8 |
3 (5’7”–5’9”) | 1 7/8 | 2 | 2 1/8 |
4 (5’10”–6’1”) | 1 7/8 | 2 1/8 | 2 1/8 |
2. Additional fabric for the outer pocket lining and bindings, 140 cm wide, 200 g/m2, with a directional print/nap, in meters:
Height, cm | Meters |
1 (154-160) | 0.65 |
2 (162–168) | 0.7 |
3 (170–176) | 0.7 |
4 (178–184) | 0.75 |
Additional fabric for the outer pocket lining and bindings, 55" wide, 200 g/m2, with a directional print/nap, in yards:
Height, ft | Yards |
1 (5’1”–5’3”) | 3/4 |
2 (5’4”–5’6”) | 3/4 |
3 (5’7”–5’9”) | 3/4 |
4 (5’10”–6’1”) | 7/8 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Pocketing fabric for the inner pocket lining, 140 cm (55") wide, 100 g/m2, for all sizes in all heights — 0.3 m (3/8 yd)
4. One separating metal zipper No. 8, 70 cm (27 1/2") long, for all sizes in all heights
5. Two top zipper stoppers for adjusting the zipper length
6. Double-sided adhesive tape, 5 mm (just under 1/4") wide — 1 m (1 1/8 yd)
7. Paper-backed fusible web tape, 1 cm (3/8") wide — 2.2 m (2 3/8 yd)
8. Two set-in snaps, 1 cm (3/8") in diameter
9. Matching thread for the outer layer — 1 spool
10. Matching thread for the lining fabric — 1 spool
11. Matching topstitching thread for the outer layer (for example, Madeira No. 35) — 1 spool
- sewing machine for construction
- one-sided zipper foot for the sewing machine
- teflon or walking foot for the sewing machine
- press tool for installing snaps
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 36.9 | 14 1/2 |
Waistline ease | 55.2–55.8 | 21 3/4–22 |
Hipline ease | 24.6–25.8 | 9 5/8–10 1/8 |
Upper arm ease | 12.9–13.4 | 5 1/8–5 1/4 |
Height, cm | Back length including waistband, cm | Sleeve length including shoulder width and cuff (estimated), cm |
1 (154–160) | 67.5–70.2 | 79.1–82.3 |
2 (162–168) | 70.5–73.2 | 81.1–84.3 |
3 (170–176) | 73.5–76.2 | 83.2–86.3 |
4 (178–184) | 76.5–79.2 | 85.1–88.3 |
Height, ft | Back length including waistband, in | Sleeve length including shoulder width and cuff (estimated), in |
1 (5’1”–5’3”) | 26 5/8–27 5/8 | 31 1/8– 32 3/8 |
2 (5’4”–5’6”) | 27 3/4–28 7/8 | 31 7/8–33 1/4 |
3 (5’7”–5’9”) | 28 7/8–30 | 32 3/4–34 |
4 (5’10”–6’1”) | 30 1/8–31 1/8 | 33 1/2–34 3/4 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for heights 3 and 4 the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Eiza instructions Sample
Страница VK
VikiSews
Канал на YouTube
VikiSews
Telegram-канал
Vikisews Patterns