Hailey Jacket
Hailey is an oversized, straight-cut jacket padded with Alpolux 200 insulation material. The jacket features voluminous shirt sleeves, a tall stand collar that can also be worn as a turn-down collar, and welt pockets with sewn-in ends on the front. The sleeves are finished with elasticated cuffs. The jacket closes with an off-center front snap fastening. The faced hem has a casing with elastic cord threaded through it. The cord has stoppers on it and is held with loops at the side seams of the lining. Hailey is below-the-hip length.
Model Sofia: Height 172 cm (5’8”), Bust 84 cm (33 1/8”), Waist 64 cm (25 1/4”), Hips 90 cm (35 3/8”). Sofia is wearing size XS-S in height 3.
Model Ksenia: Height 171 cm (5'7"), Bust 86 cm (33 7/8”), Waist 63 cm (24 3/4”), Hips 92 cm (36 1/4”). Ksenia is wearing size XS-S in height 2.
Approximate sewing time ― 2 days (16−20 hours).
To sew the jacket, choose outerwear fabrics with the following properties:
- medium weight, soft, non-stretch, water-repellent, windproof
- the fiber content can include natural fibers (cotton), artificial fibers (viscose), blends (cotton + viscose, cotton + polyester, etc.), and synthetics (polyester, polyamide)
- the following fabrics are recommended: blended raincoat fabrics, outerwear fabrics, dewspo, taffeta, lacquered nylon.
For the insulation layer, choose 200 g/m2 materials: alpolux, isosoft, thinsulate, holofiber, polyester batting, or use pre-quilted outerwear fabrics.
Attention! We do not recommend stretchy knit materials or heavyweight (denim) fabrics.
For the lining, choose lining fabrics made of artificial fibers (viscose), blends (viscose + elastane, viscose + polyester), or synthetics (polyester, polyester + elastane).
The jacket in the photos is made of outerwear fabric with an added insulation layer. The fabric is medium weight, pliable, soft, and non-stretch. The fiber content is 100% polyester.
The insulation material is alpolux 200 g/m2 and is a blend of 15% wool and 85% microfiber.
The lining is 100% viscose.
1. Main fabric, 140 cm wide, with a directional print, in meters:
Height, cm | Size | ||
XS–S | M–L | XL | |
2.25 | 2.6 | 2.7 | |
2 (162–168) | 2.3 | 2.7 | 2.8 |
3 (170–176) | 2.4 | 2.8 | 2.9 |
4 (178–184) | 2.45 | 2.9 | 3 |
Main fabric, 150 cm wide, with a directional print, in meters:
Height, cm | Size | ||
XS–S | M–L | XL | |
1 (154–160) | 2.15 | 2.25 | 2.6 |
2 (162–168) | 2.25 | 2.3 | 2.65 |
3 (170–176) | 2.3 | 2.4 | 2.75 |
4 (178–184) | 2.4 | 2.5 | 2.85 |
Main fabric, 55" wide, with a directional print, in yards:
Height, ft | Size | ||
XS–S | M–L | XL | |
1 (5’1”–5’3”) | 2 1/2 | 2 7/8 | 3 |
2 (5’4”–5’6”) | 2 1/2 | 3 | 3 |
3 (5’7”–5’9”) | 2 5/8 | 3 | 3 1/8 |
4 (5’10”–6’1”) | 2 5/8 | 3 1/8 | 3 1/4 |
Main fabric, 59" wide, with a directional print, in yards:
Height, ft | Size | ||
XS–S | M–L | XL | |
1 (5’1”–5’3”) | 2 3/8 | 2 1/2 | 2 7/8 |
2 (5’4”–5’6”) | 2 1/2 | 2 1/2 | 2 7/8 |
3 (5’7”–5’9”) | 2 1/2 | 2 5/8 | 3 |
4 (5’10”–6’1”) | 2 5/8 | 2 3/4 | 3 1/8 |
2. Lining fabric, 140 cm wide, with a directional print, in meters:
Height, cm | Size | ||
XS–S | M–L | XL | |
1 (154–160) | 1.9 | 1.95 | 1.95 |
2 (162–168) | 2 | 2 | 2.1 |
3 (170–176) | 2.1 | 2.1 | 2.2 |
4 (178–184) | 2.15 | 2.2 | 2.3 |
Lining fabric, 55” wide, with a directional print, in yards:
Height, ft | Size | ||
XS–S | M–L | XL | |
1 (5’1”–5’3”) | 2 1/8 | 2 1/8 | 2 1/8 |
2 (5’4”–5’6”) | 2 1/8 | 2 1/8 | 2 1/4 |
3 (5’7”–5’9”) | 2 1/4 | 2 1/4 | 2 3/8 |
4 (5’10”–6’1”) | 2 3/8 | 2 3/8 | 2 1/2 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Insulation, 200 g/m2, 150 cm wide, without nap, in meters:
Height, cm | Size | ||
XS–S | M–L | XL | |
1 (154–160) | 1.9 | 1.9 | 2.3 |
2 (162–168) | 2 | 2 | 2.4 |
3 (170–176) | 2.05 | 2.1 | 2.5 |
4 (178–184) | 2.15 | 2.15 | 2.6 |
Insulation, 200 g/m2, 59” wide, without nap, in yards:
Height, ft | Size | ||
XS–S | M–L | XL | |
1 (5’1”–5’3”) | 2 1/8 | 2 1/8 | 2 1/2 |
2 (5’4”–5’6”) | 2 1/8 | 2 1/8 | 2 5/8 |
3 (5’7”–5’9”) | 2 1/4 | 2 1/4 | 2 3/4 |
4 (5’10”–6’1”) | 2 3/8 | 2 3/8 | 2 7/8 |
4. Lightweight (40 g/m2) knit or woven interfacing, 140 cm wide, in meters:
Height, cm | Size | ||
XS–S | M–L | XL | |
1 (154–160) | 0.9 | 0.9 | 0.95 |
2 (162–168) | 0.95 | 0.95 | 1 |
3 (170–176) | 0.95 | 1 | 1.05 |
4 (178–184) | 1 | 1.05 | 1.05 |
Lightweight (40 g/m2) knit or woven interfacing, 55" wide, in yards:
Height, ft | Size | ||
XS–S | M–L | XL | |
1 (5’1”–5’3”) | 1 | 1 | 1 |
2 (5’4”–5’6”) | 1 | 1 | 1 1/8 |
3 (5’7”–5’9”) | 1 | 1 1/8 | 1 1/8 |
4 (5’10”–6’1”) | 1 1/8 | 1 1/8 | 1 1/8 |
5. Elastic, 3.5 cm (1 3/8") wide:
The exact elastic length is specified in the pattern.
Size | XS–S | M–L | XL |
Meters | 0.55 | 0.6 | 0.6 |
Yards | 5/8 | 5/8 | 5/8 |
6. Elastic cord for the hem casing, 5 mm (just under 1/4") in diameter:
The exact cord length is specified in the pattern.
Size | XS–S | M–L | XL |
Meters | 1.6 | 1.65 | 1.8 |
Yards | 1 3/4 | 1 3/4 | 2 |
7. Double-hole stoppers — 2 pcs
8. Snaps, 1.5 cm (5/8") in diameter — 6 pcs (plus 1 or 2 spare snaps)
9. Matching thread — 1 spool (+ 4 spools for the overlocker, optional, if you wish to overlock the lining edges)
10. Grommets, 6–8 mm (1/4"–3/8") in diameter — 4 pcs
- sewing machine for construction
- overlocker for finishing raw edges. It can be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm) (optional)
- one-sided foot
- stitch-in-the-ditch foot for the sewing machine (optional)
- hand press tool, punch tool, and molds to install grommets and snaps
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 54.1–54.2 | 21 1/4–21 3/8 |
Waistline ease | 74.7–75.7 | 29 3/8–29 3/4 |
Hipline ease | 51.1–54 | 20 1/8–21 1/4 |
Upper arm ease | 25.7–26.1 | 10 1/8–10 1/4 |
Height, cm | Back length, cm | Sleeve length including shoulder and cuff width, cm |
1 (154–160) | 85.5–88.7 | 78.9–80.4 |
2 (162–168) | 89.6–92.7 | 80.9–82.4 |
3 (170–176) | 93.6–97.6 | 82.9–84.4 |
4 (178–184) | 97.6–100.7 | 84.9–86.4 |
Height, ft | Back length, in | Sleeve length including shoulder and cuff width, in |
1 (5’1”–5’3”) | 33 5/8–34 7/8 | 31 1/8–31 5/8 |
2 (5’4”–5’6”) | 35 1/4–36 1/2 | 31 7/8–32 1/2 |
3 (5’7”–5’9”) | 36 7/8–38 3/8 | 32 5/8–33 1/4 |
4 (5’10”–6’1”) | 38 3/8–39 5/8 | 33 3/8–34 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for heights 3 and 4 the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Hailey instruction Sample
VK Website
VikiSews
YouTube
VikiSews