Lolle jacket
Lolle is a semi-fitted jacket with a straight cut. There is a yoke on the back and welt pockets with sewn-in ends on the front. The left front features a patch pocket. The shirt collar has a separate collar stand. The long shirt sleeves are made up of two pieces, with a slit in the elbow seam. The cuffs have a stud button and buttonhole closure. The jacket fastens with a separating zipper at the center front. The bottom edge of the jacket features an applied waistband with two tabs that have a stud button and buttonhole closure. All seams are topstitched. Lolle is below-waist length.
Model Daria: Height 176 cm (5’9”), Bust 84 cm (33 1/8”), Waist 63 cm (24 3/4”), Hips 91 cm (35 7/8”). Daria is wearing size XS in height 3.
Approximate sewing time — 2 days (16 hours).
To sew this jacket, choose medium- to heavyweight, non-stretch or low-stretch fabrics made of natural fibers, artificial fibers, blends, or synthetics.
The following fabrics are recommended: denim, corduroy.
For the pocket lining, we recommend using cotton or poplin.
The jacket in the photo is made of denim. The fabric is medium weight and has very little stretch. The fiber content is 100% cotton. The fabric weight is 300 g/m2.
The pocket lining is 100% cotton.
Important! If you choose the fabric that gets a stone washing effect after washing, make sure to wash your fabric once before sewing.
In this case refer to the fabric requirements given for one size and height bigger than your actual ones as the fabric will shrink.
Wash the finished garment one or two times.
1. Main fabric, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | |||
XS–S | M | L | XL | |
1 (154–160) | 1.7 | 1.8 | 1.9 | 2 |
2 (162–168) | 1.75 | 1.8 | 1.95 | 2 |
3 (170–176) | 1.8 | 1.85 | 2 | 2.05 |
4 (178–184) | 1.85 | 1.95 | 2.05 | 2.1 |
Main fabric, 150 cm wide, with a directional print/nap, in meters:
Height, cm | Size | ||||
XS | S | M | L | XL | |
1 (154–160) | 1.5 | 1.55 | 1.7 | 1.7 | 1.75 |
2 (162–168) | 1.55 | 1.6 | 1.75 | 1.75 | 1.8 |
3 (170–176) | 1.6 | 1.7 | 1.8 | 1.85 | 1.9 |
4 (178–184) | 1.65 | 1.75 | 1.85 | 1.9 | 1.95 |
Main fabric, 55" wide, with a directional print/nap, in yards:
Height, ft | Size | |||
XS–S | M | L | XL | |
1 (5’1”–5’3”) | 1 7/8 | 2 | 2 1/8 | 2 1/8 |
2 (5’4”–5’6”) | 1 7/8 | 2 | 2 1/8 | 2 1/8 |
3 (5’7”–5’9”) | 2 | 2 | 2 1/8 | 2 1/4 |
4 (5’10”–6’1”) | 2 | 2 1/8 | 2 1/4 | 2 1/4 |
Main fabric, 59" wide, with a directional print/nap, in yards:
Height, ft | Size | ||||
XS | S | M | L | XL | |
1 (5’1”–5’3”) | 1 5/8 | 1 3/4 | 1 7/8 | 1 7/8 | 1 7/8 |
2 (5’4”–5’6”) | 1 3/4 | 1 3/4 | 1 7/8 | 1 7/8 | 2 |
3 (5’7”–5’9”) | 1 3/4 | 1 7/8 | 2 | 2 | 2 1/8 |
4 (5’10”–6’1”) | 1 3/4 | 1 7/8 | 2 | 2 1/8 | 2 1/8 |
2. Lining fabric, 140 cm (55”) wide, with a directional print, for all heights:
Size | XS–S | M–XL |
Meters | 0.25 | 0.3 |
Yards | 1/4 | 3/8 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Lightweight interfacing, knit or woven, 140 cm (55”) wide, for all heights:
Size | XS–S | M | L | XL |
Meters | 0.6 | 0.65 | 0.7 | 0.75 |
Yards | 5/8 | 3/4 | 3/4 | 7/8 |
4. Stitched bias-cut fusible stay tape with stitch reinforcement, 1.5 cm (5/8") wide — 0.5 m (1/2 yd)
5. One separating zipper, Nos. 3.5–4, for all sizes:
Height, cm | Zipper length, cm |
1 (154–160) | 45 |
2 (162–168) | 50 |
3 (170–176) | 55 |
4 (178–184) | 55 |
Height, ft | Zipper length, in |
1 (5’1”–5’3”) | 17 3/4 |
2 (5’4”–5’6”) | 19 5/8 |
3 (5’7”–5’9”) | 21 5/8 |
4 (5’10”–6’1”) | 21 5/8 |
6. Six (plus one or two spare ones) metal stud buttons for jeans, 1.5–2 cm (5/8–3/4") in diameter
7. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
8. Matching (or contrasting) topstitching thread (for example, Madeira No. 35) — 1 spool
- sewing machine for construction
- overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- buttonhole foot for the sewing machine
- stitch-in-the-ditch foot for the sewing machine (optional)
- one-sided foot for the sewing machine to attach the zipper
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 27.2–34.3 | 10 3/4–13 1/2 |
Waistline ease | 42.4–50.3 | 16 3/4–19 3/4 |
Upper arm ease | 18–22.6 | 7 1/8–8 7/8 |
Height, cm | Back length including waistband, cm | Sleeve length including shoulder width and cuff, cm |
1 (154–160) | 43.3–46.4 | 75–76.5 |
2 (162–168) | 45.4–48.4 | 77.3–78.9 |
3 (170–176) | 48.4–51.8 | 79.7–81.3 |
4 (178–184) | 51.5–54.5 | 82.1–83.7 |
Height, ft | Back length including waistband, in | Sleeve length including shoulder width and cuff, in |
1 (5’1”–5’3”) | 17–18 1/4 | 29 1/2–30 1/8 |
2 (5’4”–5’6”) | 17 7/8–19 | 30 3/8–31 1/8 |
3 (5’7”–5’9”) | 19–20 3/8 | 31 3/8–32 |
4 (5’10”–6’1”) | 20 1/4–21 1/2 | 32 3/8–33 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for heights 3 and 4 the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Lolle instructions Sample
Страница VK
VikiSews
Канал на YouTube
VikiSews
Telegram-канал
Vikisews Patterns