Jewel pants
Jewel is a pair of loose-fitting, straight-cut pants sitting 8 cm (3 1/8") below the natural waistline. The waistband features topstitched belt loops. The front leg is made up of three pieces. The top front features faux side pockets and design lines. The back is designed with a yoke and patch pockets. The pants have a fly front zipper closure. The waistband fastens with a stud button and buttonhole. All the seams feature decorative topstitching. The pants are floor-length.
Model Sofia: Height 172 cm (5’8”), Bust 84 cm (33 1/8”), Waist 64 cm (25 1/4”), Hips 90 cm (35 3/8”). Sofia is wearing size 36 in height 3.
Approximate sewing time ― 2 days (16 hours).
To sew these pants, choose fabrics with the following properties:
- medium weight, pliable, breathable, non-stretch or with very little stretch, opaque
- the fiber content can include natural fibers (cotton) and blends (cotton + viscose, etc.)
- the following fabrics are recommended: denim, corduroy
Attention! We do not recommend using lightweight, thin fabrics.
For the pocket lining, we recommend using cotton or poplin.
The garment in the photo is made of denim. The fabric is medium weight, pliable and non-stretch. The fiber content is 100% cotton; the fabric weight is 346 g/m2.
The pocket lining is 100% cotton.
1. Main fabric, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | ||||
34–44 | 46 | 48 | 50 | 52 | |
1.85 | 1.85 | 1.85 | 1.9 | 2.05 | |
2 (162–168) | 1.9 | 1.95 | 1.95 | 2 | 2.12 |
3 (170–176) | 2 | 2 | 2 | 2.1 | 2.18 |
4 (178–184) | 2.05 | 2.05 | 2.1 | 2.1 | 2.25 |
Main fabric, 150 cm wide, with a directional print/nap, in meters:
Height, cm | Size | ||
34 | 36 | 38–52 | |
1 (154–160) | 1.65 | 1.7 | 1.85 |
2 (162–168) | 1.7 | 1.75 | 1.9 |
3 (170–176) | 1.75 | 1.8 | 2 |
4 (178–184) | 1.8 | 1.85 | 2.05 |
Main fabric, 55" wide, with a directional print/nap, in yards:
Height, ft | Size | ||||
34–44 | 46 | 48 | 50 | 52 | |
1 (5’1”–5’3”) | 2 | 2 | 2 | 2 1/8 | 2 1/4 |
2 (5’4”–5’6”) | 2 1/8 | 2 1/8 | 2 1/8 | 2 1/8 | 2 3/8 |
3 (5’7”–5’9”) | 2 1/8 | 2 1/8 | 2 1/8 | 2 1/4 | 2 3/8 |
4 (5’10”–6’1”) | 2 1/4 | 2 1/4 | 2 1/4 | 2 1/4 | 2 1/2 |
Main fabric, 59" wide, with a directional print/nap, in yards:
Height, ft | Size | ||
34 | 36 | 38–52 | |
1 (5’1”–5’3”) | 1 3/4 | 1 7/8 | 2 |
2 (5’4”–5’6”) | 1 7/8 | 1 7/8 | 2 1/8 |
3 (5’7”–5’9”) | 1 7/8 | 2 | 2 1/8 |
4 (5’10”–6’1”) | 2 | 2 | 2 1/4 |
2. Lining fabric, 140 cm (55") wide, for all sizes in all heights — 15 cm (5 7/8")
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Lightweight (50 g/m2) knit or woven interfacing, 140 cm (55") wide, for all heights, in meters/yards:
Size | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 |
meters | 0.85 | 0.9 | 0.93 | 0.97 | 1 | 1.05 | 1.1 | 1.15 | 1.2 | 1.25 |
yards | 7/8 | 1 | 1 | 1 | 1 1/8 | 1 1/8 | 1 1/4 | 1 1/4 | 1 1/4 | 1 3/8 |
4. One metal pant zipper, 20 cm (7 7/8") long, for all sizes in all heights
5. Bias-cut fusible stay tape, 1 cm (3/8") wide — 0.7 m (3/4 yd)
6. One metal stud button for jeans, 2–2.5 cm (3/4–1") in diameter
7. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
8. Matching (or contrasting) topstitching thread (for example, Madeira No. 35) — 2 spools
- sewing machine for construction
- overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- buttonhole foot for the sewing machine
- stitch-in-the-ditch foot for the sewing machine (optional)
- stud button press tool with a set of molds
Ease type | Ease measurement, cm | Ease measurement, in |
Waistline ease (estimated) | 17.3–20.6 | 6 3/4–8 1/8 |
Hipline ease | 2.6–4.1 | 1–1 5/8 |
Height, cm | Side seam length including waistband, cm |
1 (154–160) | 105.1–107.1 |
2 (162–168) | 109.1–111.1 |
3 (170–176) | 113.1–115.1 |
4 (178–184) | 117.1–119.1 |
Height, ft | Side seam length including waistband, in |
1 (5’1”–5’3”) | 41 3/8–42 1/8 |
2 (5’4”–5’6”) | 43–43 3/4 |
3 (5’7”–5’9”) | 44 1/2–45 3/8 |
4 (5’10”–6’1”) | 46 1/8–46 7/8 |
Finished hem width | ||||||||||
Size | 34 | 36 | 38 | 40 | 42 | 44 | 46 | 48 | 50 | 52 |
cm | 21.4 | 22.4 | 23.4 | 24.4 | 25.4 | 26.4 | 27.4 | 28.4 | 29.4 | 30.4 |
inches | 8 3/8 | 8 7/8 | 9 1/4 | 9 5/8 | 10 | 10 3/8 | 10 3/4 | 11 1/8 | 11 5/8 | 12 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900 mm width.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Jewel Instructions Sample
Страница VK
VikiSews
Канал на YouTube
VikiSews
Telegram-канал
Vikisews Patterns