Wonderful
10
Chiara blouse
Chiara blouse
SALE
986,20
295,86
Chiara is a tight-fitting corset top with separate bust cups. The front and back feature rigilene boning inserted into applied channels. The top closes with a separating zipper in the center back seam. The long sleeves are gathered at the cap and shirred with elastic thread above and below the elbow. Chiara is waist-length.
Model Alina: Height 172 cm (5'8"), Bust 86 cm (33 7/8”), Waist 65 cm (25 5/8”), Hips 93 cm (36 5/8”). Alina is wearing size 36 in height 3.
Model Yana: Height 174 cm (5’8”), Bust 107 cm (42 1/8”), Waist 87 cm (34 1/4”), Hips 122 cm (48”). Yana is wearing size 48 with cup size 46 in height 3.
Approximate sewing time – 2 days (16 hours).
To sew this garment, choose blouse and dress-weight fabrics with the following properties:
- medium weight, pliable, soft, non-stretch or with very little stretch, opaque
- the fiber content can include natural fibers (cotton, linen), artificial fibers (viscose), blends (linen + polyester, cotton + polyester, cotton + viscose, etc.), and synthetics (polyester, polyester + elastane)
- the following fabrics are recommended: textured cotton, cotton shirting, linen, lightweight denim.
Attention! We do not recommend stretchy knit fabrics and lightweight sheer fabrics (chiffon, organza, stretch lace).
For the lining, choose lining fabrics made of artificial fibers (viscose), blends (viscose + elastane, viscose + polyester), or synthetics (polyester, polyester + elastane).
The top in the photos is made of textured cotton. The fabric is lightweight, soft, and has a little stretch due to the texture. The fiber content is 100% cotton.
The lining is a blend of cotton and elastane.
1. Main fabric, 140 cm wide, with a directional print/nap, in meters:
Height, cm | Size | ||
34–40 | 42 | 44–52 | |
1 (154–160) | 1.25 | 1.7 | 1.7 |
2 (162–168) | 1.25 | 1.75 | 1.75 |
3 (170–176) | 1.3 | 1.8 | 1.8 |
4 (178–184) | 1.35 | 1.85 | 1.85 |
Main fabric, 55" wide, with a directional print/nap, in yards:
Height, ft | Size | ||
34–40 | 42 | 44–52 | |
1 (5’1”–5’3”) | 1 3/8 | 1 7/8 | 1 7/8 |
2 (5’4”–5’6”) | 1 3/8 | 1 7/8 | 1 7/8 |
3 (5’7”–5’9”) | 1 3/8 | 2 | 2 |
4 (5’10”–6’1”) | 1 1/2 | 2 | 2 |
2. Lining fabric, 140 cm wide, for all sizes:
Height, cm | Meters |
1 (154-160) | 0.45 |
2 (162-168) | 0.45 |
3 (170–176) | 0.45 |
4 (178–184) | 0.5 |
Lining fabric, 55” wide, for all sizes:
Height, ft | Yards |
1 (5’1”–5’3”) | 1/2 |
2 (5’4”–5’6”) | 1/2 |
3 (5’7”–5’9”) | 1/2 |
4 (5’10”–6’1”) | 1/2 |
IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.
3. Lightweight interfacing, knit or woven, 140 cm (55") wide, for all sizes and heights – 0.55 m (5/8 yd).
4. Rigilene boning (7 mm [1/4"] wide stiff plastic tape) – 1.6–2 m (1 3/4–2 1/8 yd).
5. One set of bra underwires (in the necessary size).
6. One separating zipper, 40 cm (15 3/4") long, for all sizes and heights.
7. Elastic thread — 1 spool.
8. Matching thread — 5 spools (1 spool for the sewing machine + 4 spools for the overlocker)
- sewing machine for construction
- overlocker for finishing raw edges. It can be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2–3 mm, stitch length 2.5 mm)
- edgestitch foot for the sewing machine (optional)
- narrow zipper foot for the sewing machine.
Ease type | Ease measurement, cm | Ease measurement, in |
Bust ease | 1.1–4 | 3/8–1 5/8 |
Waistline ease | 0.8–2.2 | 3/8–7/8 |
Upper arm ease | 35–38.3 | 13 3/4–15 1/8 |
Height, cm | Sleeve length, cm |
1 (154–160) | 80.3–80.4 |
2 (162–168) | 82.3–82.4 |
3 (170–176) | 84.3–84.4 |
4 (178–184) | 86.3–86.4 |
Height, ft | Sleeve length, in |
1 (5’1”–5’3”) | 31 5/8 |
2 (5’4”–5’6”) | 32 3/8–32 1/2 |
3 (5’7”–5’9”) | 33 1/4 |
4 (5’10”–6’1”) | 34 |
Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download:
1. The pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for height categories 3 and 4, the plotter pattern comes on 2 pages.
2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).
If you have any questions, please let us know at info@vikisews.com
Chiara instructions SampleВаш рост:
154-160162-168170-176178-184
Ваш размер (европейский):
34363840424446485052
986,20
295,86
