Vilora Skirt

8.00

Vilora is a semi-fitted wrap skirt with a straight silhouette. It features an asymmetrical horizontal design line below the hip on both the front and back panels. The back of the skirt has a center seam in the top section. The asymmetry of the skirt is emphasized by the angled edge on the right side and the longer hemline which extends from the center to the side seam. Vilora has a waistband with an elasticated section in the back. The left front waistband features a belt which fastens with a buckle and thus secures the waistband at the waist. The top of the waistband sits at the natural waistline. The skirt fastens with Velcro. Topstitching is featured along the center seam of the back panel, the asymmetrical design line, the front edge, and along the hem of the garment.

Model Larisa: Bust 85 cm (33 1/2”), Waist 64 cm (25 1/4”), Hips 93 cm (36 5/8”), Height 172cm (5’8”). Larisa is wearing size 36 in height 3.

To sew this skirt, choose woven fabrics with the following properties:

- Medium weight, structured, breathable, soft, non-stretch or with very little stretch, opaque;

- The fiber content can include natural fibers (wool, silk, cotton, linen), artificial (viscose), blends (wool + silk, cotton + polyester, cotton + viscose, etc.), and synthetic fibers (polyester, polyester + elastane);

- The following fabrics are recommended: dress-weight or suiting wool, gabardine, denim, micro-corduroy, faux leather, cotton suiting, linen suiting.

Attention! We do not recommend stretchy knit materials and lightweight sheer fabrics (chiffon, organza, stretch lace).

The skirt in the photo is made of denim fabric. This fabric is medium weight, soft, structured, and has very little stretch. The fiber content is 100% cotton.

1. Main fabric, 140 cm wide, with a directional print, in meters:

Height, cm/ Size

34–36

38

40–52

1 (154–160)

0.89

0.94

1.22

2 (162–168)

0.92

0.97

1.26

3 (170–176)

0.95

1

1.31

4 (178–184)

0.98

1.03

1.35

Main fabric, 55” wide, with a directional print, in yards:

Height, ft/ Size

34­–36

38

40–52

1 (5'1"–5'3")

1   

1   

1 3/8

2 (5'4"–5'6")

1   

1   

1 3/8

3 (5'7"–5'9")

1   

1 1/8

1 3/8

4 (5'10"–6'1")

1 1/8

1 1/8

1 1/2

Main fabric, 110 cm wide, with a directional print, in meters:

Height, cm

Size

34–36

38–40

42

44

46–52

1 (154–160)

1.25

1.27

1.27

1.38

1.58

2 (162–168)

1.27

1.31

1.31

1.43

1.62

3 (170–176)

1.37

1.41

1.41

1.49

1.69

4 (178–184)

1.4

1.44

1.44

1.53

1.73

Main fabric, 43” wide, with a directional print, in yards:

Height, ft/ Size

34–36

38–40

42

44

46–52

1 (5'1"–5'3")

1 3/8

1 3/8

1 3/8

1 1/2

1 3/4

2 (5'4"–5'6")

1 3/8

1 3/8

1 3/8

1 5/8

1 3/4

3 (5'7"–5'9")

1 1/2

1 1/2

1 1/2

1 5/8

1 7/8

4 (5'10"–6'1")

1 1/2

1 5/8

1 5/8

1 5/8

7/8

IMPORTANT! When purchasing fabric, please account for shrinkage and buy 5% more than required.

2. Lightweight fusible woven or knit interfacing, 140 cm (55”) wide, for all heights and sizes – 0.45 m (1/2 yd).

3. 1 cm (3/8”) wide straight-grain fusible stay tape — 1–1.2 m (1 1/8 yd–1 1/4 yd).

4. 4 cm (1 5/8”) wide elastic, 30–55 cm (3/8 yd–1/2 yd), depending on the size. The length of elastic is indicated on the pattern piece.

5. Hook and Loop Velcro tape — 16 cm (6 1/4”).

6. 4.5–5 cm (1 3/4”–2”) wide belt buckle for belt. The distance from the center of the buckle to the outer edge in width should be 2.2 cm (7/8”). Important! If this distance is bigger, cut an additional allowance in the length of the buckle strap piece.

7. Matching thread - 5 spools (1 spool for the sewing machine and 4 spools for the overlocker).

8. Matching topstitching thread (for example, Madeira №35) - 2 spools.

- Sewing machine for construction;

- Overlocker for finishing raw edges. This may be replaced with a stretch overlock stitch or a zigzag stitch on the sewing machine (overlock or zigzag stitch width 2-3mm, stitch length 2.5mm);

- Stitch-in-the-ditch foot for your sewing machine (optional);

- Bodkin for threading elastic through a channel (may be replaced with a safety pin).

Ease Type

Ease Measurement, cm

Ease Measurement, in

Waistline ease

0.2

 1/8

Hipline ease

5.6–5.7

2 1/4

Height, cm

Garment length at center back including waistband, cm

1 (154–160)

70.4

2 (162–168)

73.4

3 (170–176)

76.4

4 (178–184)

79.4

Height, ft

Garment length at center back including waistband, in

1 (5'1"–5'3")

27 3/4

2 (5'4"–5'6")

28 7/8

3 (5'7"–5'9")

30 1/8

4 (5'10"–6'1")

31 1/4

Once the order is paid, within 1 minute you will receive an email with the details of the order and a link to your personal account, where the following will be available for download: 

1. the pdf pattern in your chosen size, in the following formats: Letter, A4, A0 and plotter format. The size of the plotter format is indicated in the name of the document. You will need a plotter printer that can print at least 900mm width. Note that for height categories 3 and 4, the plotter pattern comes on 2 pages. 

2. Detailed instructions which include cutting layouts, construction steps accompanied by photos, as well as instructions on how to work with Vikisews patterns (printing, taping, adjusting, sewing terminology).

If you have any questions, please let us know at info@vikisews.com

Vilora instructions Sample
Your height:
154-160162-168170-176178-184
Your size (European):
34363840424446485052
8.00
This item has already been purchased by you. You can choose a different height or size, or go to your User Account to view this product.
BuyGo to cart!